玻璃熔窑烟道热工计算

以1000 t/d平板玻璃熔窑为例,提出了运用"水力最优断面"的概念来计算烟道断面尺寸的方法,并给出了计算步骤;计算了烟道阻力;并对烟道采用不同保温层情况下的隔热性和经济性两方面进行了比较计算.     

高熵形状记忆合金的研究进展

高熵形状记忆合金是在等原子比NiTi合金的基础上,结合高熵合金的概念,逐渐发展起来的一种新型高温形状记忆合金。近年来,已开发出了综合性能优异的(TiZrHf)50(NiCoCu)50系和(TiZrHf)50(NiCuPd)50系高熵形状记忆合金,引起了广泛的关注和研究兴趣。本文从物相组成、微观组织、马氏体相变行为、形状记忆效应和超弹性等角度出发,综述了高熵形状记忆合金的研究进展,并对高熵形状记忆合金未来的研究重点进行了展望。     

水平一阶导数在航磁圈定断裂中的应用

对于区域磁场任意水平方向求一阶导数,相当于这个方向两侧边缘磁性体产生的磁异常,因此可以突出垂直于这个方向上的磁异常,使沿垂直此方向展布的断裂有明显的反映.该文对该方法进行了理论模型的分析研究,并通过实例证明了该方法在增强断裂磁场特征及准确划定断裂位置方面具有明显的效果.     

Mechanical and dielectric properties of functionalized boron nitride nanosheets/silicon nitride composites

Uniformly dispersed boron nitride nanosheets (BNNSs) reinforced silicon nitride (Si₃N₄) composites were prepared by surface modification assisted flocculation combined with SPS sintering. In order to improve the dispersibility of the BNNSs in the composites, the liquid phase stripped BNNSs are surface functionalized by a two-step covalently modification. The amino-modified BNNSs (NH₂-BNNSs) and Si₃N₄ powders have opposite surface potential, mixed evenly by electrostatic interaction during flocculation. The results showed that mechanical properties of Si₃N₄ composites were obviously enhanced by adding NH₂-BNNSs. The fracture toughness and bending strength of Si₃N₄ composites added 0.75 wt% NH₂-BNNSs were increased by 34% and 28%, respectively, compared with monolithic Si₃N₄. Toughening mechanisms are synergistic action of the torn, pull-out or bridging of BNNSs and crack deflection mechanisms with microstructural analyzes. The dielectric properties of the Si₃N₄ ceramics are also improved after the addition of NH₂-BNNSs.     

Spectral radiance reconstruction from trichromatic camera responses based on orthogonal test and regularized algorithm

Reconstruction of spectral information based on multi‐channel image system is a significant problem in color reproduction, detection, and recognition. A spectral radiance reconstruction from trichromatic digital camera responses is researched in this article. The mapping relationship between the trichromatic imaging system response and the incident spectral radiance is analyzed. Then, in order to remove the ill‐posedness of the problem, a regularized constraint solution model of spectral radiance reconstruction matrix is established. And the spectral radiance can be reconstructed by spectral radiance reconstruction matrices and trichromatic imaging system response. Finally, the spectral radiance reconstruction matrix is estimated by the system radiometric calibration experiment. The input radiance is offered by a LCD display. A 3‐factor and 9‐level orthogonal test is designed for the calibration experiment, and a test set of 24 colors is used for precision analysis. The results show that the average relative mean error of our method is 8.69%, it is lower than that of Wiener filtering method by 2.84%. The method can reconstruct spectral radiance information effectively.     

Cyclic thermal shock resistance of h-BN composite ceramics with La2O3–Al2O3–SiO2 addition

The effects of La₂O₃–Al₂O₃–SiO₂ addition on the thermal conductivity, coefficient of thermal expansion (CTE), Young's modulus and cyclic thermal shock resistance of hot-pressed h-BN composite ceramics were investigated. The samples were heated to 1000 °C and then quenched to room temperature with 1–50 cycles, and the residual flexural strength was used to evaluate cyclic thermal shock resistance. h-BN composite ceramics containing 10 vol% La₂O₃–Al₂O₃ and 20 vol% SiO₂ addition exhibited the highest flexural strength, thermal conductivity and relatively low CTE, which were beneficial to the excellent thermal shock resistance. In addition, the viscous amorphous phase of ternary La₂O₃–Al₂O₃–SiO₂ system could accommodate and relax thermal stress contributing to the high thermal shock resistance. Therefore, the residual flexural strength still maintained the value of 234.3 MPa (86.9% of initial strength) after 50 cycles of thermal shock.     

Strong tribocatalytic dye degradation by tungsten bronze Ba4Nd2Fe2Nb8O30

The triboelectric effect has recently demonstrated its great potential in environmental remediation and even new energy applications for triggering a number of catalytic reactions by utilizing trivial mechanical energy. In this study, Ba₄Nd₂Fe₂Nb₈O₃₀ (BNFN) submicron powders were used to degrade organic dyes via the tribocatalytic effect. Under the frictional excitation of three PTFE stirring rods in a 5 mg/L RhB dye solution, BNFN demonstrates a high tribocatalytic degradation efficiency of 97% in 2 h. Hydroxyl radicals (?OH) and superoxide radicals (?O₂－) were also detected during the catalysis process, which proves that triboelectric energy stimulates BNFN to generate electron-hole pairs. The tribocatalysis of tungsten bronze BNFN submicron powders provides a novel and efficient method for the degradation of wastewater dye by utilizing trivial mechanical energy.     

泉州大剧院结构设计

本工程平面和立面均不规则,属于复杂超限高层建筑。主体结构采用框架-剪力墙结构体系,屋顶局部采用钢结构。结构进行了抗震性能化设计。本文详细介绍了该结构的抗震性能目标、超限情况及加强措施、线弹性分析、弹性时程分析、构件设计、楼板应力分析及弹塑性分析、钢屋盖设计以及楼座设计等。通过分析,该工程能达到了预期的抗震性能目标,抗震性能较好,具体分析方法和结论可供同类工程设计参考。     

基于信任链的骚扰电话预判技术研究

当前,骚扰电话乱象屡禁不止,严重影响了人民群众的正常生活,甚至威胁到个人财产安全,因此简单有效地识别骚扰电话技术成为亟待解决的问题。区别于现有的对电话号码进行黑白名单标记、大数据分析等识别方法,提出基于信任链的骚扰电话预判技术,从可信度量的角度计算来电号码的可靠程度,并针对高危受害群体的典型应用场景进行分析,通过对骚扰电话的预判,降低其受到电话骚扰甚至电话诈骗的可能性。